中国在北宋时期已用湿法(胆铜法)生产铜,据《宋史·艺文志》记载,有《浸铜要略》一卷,可惜已失传。1752年西班牙里奥·廷托(Rio Tinto)开始用湿法生产铜。工艺与我国北宋胆铜法基本相同,其重要进展是采用人工焙烧硫化铜矿而不靠自然风化。同期,俄国古米雪夫斯基(Гумещевсκий)矿也开始用湿法生产铜。1889年开始用湿法生产氧化铝,以后湿法炼锌、金、银、钴、镍等工厂相继出现。
第二次世界大战后,湿法冶金技术迅速发展,主要表现在以下几方面:①从矿物中提取铀的技术有很大发展;②1954年在加拿大对硫化镍、钴、铜矿加压湿法冶金技术研究成功并投入生产;③50年代起稀有金属、半导体材料(锗、镓等)的提取技术有了迅速的发展;④水解、沉淀、置换等分离、提纯的传统技术,逐渐被新兴的离子交换、溶剂萃取等新技术所取代。
60年代末至70年代初,出现了研究所谓无污染冶金的高潮。以湿法处理硫化铜矿为例,较成功的方法有:①阿比特(Arbiter)法,即低压氨浸、萃取分离、残渣浮选法。硫产品形式为(NH4)2SO4或CaSO4。②加压硫酸浸取法,85%的硫产品为单质硫。③氯化铁浸出法,即氯化铁浸取、溶剂萃取、电积法。95%以上的硫产品为单质硫。④舍利特高尔顿(Sherritt Gordon)法,即加压氨浸法。硫产品形式为(NH4)2SO4或CaSO4。⑤R.L.E.(roasting-leaching-electrowinning)法,即焙烧-浸取-电积法。硫产品为CaSO4或H2SO4。这些方法都可消除二氧化硫对空气的污染,同时能综合回收原料中的硫,已为中间试验所证实。
在湿法炼锌方面,1981年已在加拿大建成一个直接加压湿法炼锌车间。硫化锌精矿不再经氧化焙烧而直接进行浸出,可节省25%的投资,并消除了二氧化硫对大气的污染。硫产品为单质硫,回收率为96%。原则流程见图。
1。连续精馏
饲料的材料,它是被分为分数,介绍在一个或多个。
那列的外壳。由于重力之间的差别和水蒸气的液体。
阶段、液体披散在柱,从盘子的托盘,而蒸汽流了。
在每一栏,接触液体托盘。
到达底部的液柱部分蒸发,在激烈的流程。
提供boil-up发回了,这个专栏。其余的底部的液体。
为底,或退出产品。达到顶端的蒸汽冷却的专栏。
浓缩液体在头顶的冷凝器。这部分液体的专栏。
为提供液体溢出回流。其余的开销是撤回。
精华、塔顶产品。
这整个流程模式提供了精馏联系。逆流。
气液流的所有的托盘通过柱。气液阶段上。
方法给出热、压力、托盘、结构平衡在某种程度上依赖。
在接触托盘的效率。
轻(较低沸点)部件常常聚集在气相,虽然。
重(高)组成倾向的沸腾液体。结果是一个蒸汽。
针对阶段变得更丰富的组件时,液相色谱柱。
那个变得更丰富的大型部件作为这串向下。整体的分离。
提出了馏分和底部,主要取决于相关的波动性。
组成、数量的联系,并且比的盘子的液相流速。
到vapr-phase流量。如果饲料介绍在一个点沿柱壳,。
这个专栏分为上下节,这通常被称为精馏段,。
较低的部分,通常称为的部分。这些条款成为什么样的人。
在multiple-feed栏目,而不sidestream柱从产品。
撤回在柱长度除了两个最终产物。
希望多加点分,好难。谢谢。
通过溶解将物质从固体中除去,这叫作沥滤。
化学加工业用到沥滤,但这个过程通常被称作淬取,而且常常使用有机溶剂。因为沥滤被用在分离金属与矿石以及从甜菜中抽取糖方面已经有很多年,所以其理论和实践已得到高度发展。近来,环境工程师给于沥滤更大的关注,因为垃圾倾倒场和垃圾填埋场含有有害有毒废料。一种有毒化学品的自然分解有时产生一种毒性更强的化学品。从这些物质间流过的雨水会流入地下水、湖泊、河流、井、池塘等等。
还有英文参考资料:
Removal of materials by dissolving them away from solids is called leaching .(这是沥滤的概念)
The chemical process industries use leaching but the process is usually called extraction, and organic solvents are often used. The theory and practice of leaching are well-developed because for many years leaching has been used to separate metals from their ores and to extract sugar from sugar beets. Environmental engineers have become concerned with leaching more recently because of the multitude of dumps and landfills that contain hazardous and toxic waste. Sometimes the natural breakdown of a toxic chemical results in another chemical that is even more toxic .Rain that passes through these materials enters ground water, lakes, streams,wells, pond, and the like.。
Although many toxic materials have low solubility in water, the concentrations that are deemed hazardous are also very low. Furthermore, many toxic compounds are accumulated by living cells and can be more concentrated inside than outside a cell. This is why long-term exposure is a serious problem; encountering a low concentration of a toxic material a few times may not be dangerous, but having it in your drinking water day after day and year after year can ge deadly.。
Heap leaching is a countercurrent process where the solid is in a stationary heap and the solvent percolates through the solid. An example is a dump or landfill. In industrial leaching, solvent and solid are mixed, allowed to approach eqilibrium, and the two phase are separated. Liquid and solids move countercurrently to the adjacent stages. The solvent phase ,called the extract, becomes more concentrated as it contacts in stagewise fasion the increaseingly solute -rich solid. The raffinate becomes less concentrated in soluble material as it moves toward the fresh solvent phase.。
The main theory of leaching neglects mechanisms for holding the materials on the solid. Although adsorption and ion exchange can bind materials tightly to solids, we will simplify the analysis and consider only dissolving a soluble solid. An example is removing salt from sand by extraction with water.。
湿法冶炼 hydrometallurgy。
动力学酸氧低硫镍铜浸出亚光在大气压力。
作者:低含硫镍锍酸铜氧(硫酸铜,硫酸,氧气)在常压浸出液中描述的研究是目前的工作。这是从高档亚光镍铜锍得到了磁分离,主要含镍铜合金及少量硫化物。在温度,搅拌,氧气流量,颗粒大小,浓度和铜离子浓度变化的研究都影响。有人发现,通过缩小磨砂粒子在自然的核心机制和电化学淋溶的30-60℃温度范围。,表面反应速率限制与41.9 kj.mol- 1的表观活化能步骤。但是在较高温度(70-85℃),运动过程进行控制,通过产品扩散层,具有7.3千焦耳- mol - 1的表观活化能energr。